Accessoires
Bâche et arceau
Boîte de vitesses et de transfert
Carrosserie
Châssis
Circuit carburant et air
Direction
Echappement
Electricité
Embrayage
Freins
Jantes et pneus
Moteur
Ponts et transmission
Radiateur
Sièges et ceintures
Suspension
Kits
Remorquage
Essuie glace
Batteries
Blocages, arbres, mains meneuses
Compresseurs
Eclairage
Galeries de toit
Hi-lift
Look, style extérieur
Marche pieds
Pare-chocs
Passages des roues
Porte roue de secours
Protections extérieur
Sécurité
Snorkels
Tôles alu striées / non striées
Treuillage
Volants
Voyage
Divers
Huiles, liquides et graisses
Outillage
Peinture & protection
Idées cadeaux
Livres - manuels
Vêtements
Visserie & fixations- Rupture de stock
Tuyau flexible de frein avant SPECIAL
Réf : SF219824
Series Forever
Tuyau flexible de frein avant SPECIAL
Livré avec la vis pour le banjo et deux rondelles en cuivre.
Ce flexible spécialement modifié convient UNIQUEMENT si vous le montez avec les cylindres 243296 ou 243297. Explications : Il est devenu impossible de retrouver des cylindres de freins de bonne qualité pour les Minerva et Serie I. Ce qui pose problème, c'est le filet qui se trouve dans le cylindre de frein avant. Nous vendons donc des cylindres 243296 et 243297 qui ont un filet plus petit qu'à l'origine. Ces cylindres doivent être montés avec les nouveaux flexibles SF-219824 . Cela permet d'adapter les cylindres de freins avant, à la tuyauterie rigide d'origine qui se trouve sur le châssis. Un montage propre et de qualité.
Si vous réparez vos cylindres de frein avant d'origine, et que vous souhaitez remettre un nouveau flexible d'origine, vous devez commander la référence 219824.
Ecrou de fixation au châssis : 216912
-
Poids : 0.15 kg
-
Position : Avant, Avant-Gauche, Avant-Droit
-
Conditionnement : Pièce
Produits en relation
Series Forever vous conseille :
1
/ 5
-
Comes with banjo screw and two copper washers. This specially modified hose is ONLY suitable if you mount it with the 243296 or 243297 brake cylinders. Explanation: It is impossible to find good quality brake cylinders for the Minerva and Serie I. We therefore sell cylinders 243296 and 243297 which have a smaller thread than originally. These cylinders must be fitted with the new SF-219824 hoses. This makes it possible to adapt the front brake cylinders to the original rigid piping on the chassis. A clean and quality assembly. If you are repairing your original brake cylinders and want to replace a new original hose, order 219824.
-
Comes with banjo screw and two copper washers. This specially modified hose is ONLY suitable if you mount it with the 243296 or 243297 brake cylinders. Explanation: It is impossible to find good quality brake cylinders for the Minerva and Serie I. We therefore sell cylinders 243296 and 243297 which have a smaller thread than originally. These cylinders must be fitted with the new SF-219824 hoses. This makes it possible to adapt the front brake cylinders to the original rigid piping on the chassis. A clean and quality assembly. If you are repairing your original brake cylinders and want to replace a new original hose, order 219824.
-
Comes with banjo screw and two copper washers. This specially modified hose is ONLY suitable if you mount it with the 243296 or 243297 brake cylinders. Explanation: It is impossible to find good quality brake cylinders for the Minerva and Serie I. We therefore sell cylinders 243296 and 243297 which have a smaller thread than originally. These cylinders must be fitted with the new SF-219824 hoses. This makes it possible to adapt the front brake cylinders to the original rigid piping on the chassis. A clean and quality assembly. If you are repairing your original brake cylinders and want to replace a new original hose, order 219824.
-
Comes with banjo screw and two copper washers. This specially modified hose is ONLY suitable if you mount it with the 243296 or 243297 brake cylinders. Explanation: It is impossible to find good quality brake cylinders for the Minerva and Serie I. We therefore sell cylinders 243296 and 243297 which have a smaller thread than originally. These cylinders must be fitted with the new SF-219824 hoses. This makes it possible to adapt the front brake cylinders to the original rigid piping on the chassis. A clean and quality assembly. If you are repairing your original brake cylinders and want to replace a new original hose, order 219824.
-
Comes with banjo screw and two copper washers. This specially modified hose is ONLY suitable if you mount it with the 243296 or 243297 brake cylinders. Explanation: It is impossible to find good quality brake cylinders for the Minerva and Serie I. We therefore sell cylinders 243296 and 243297 which have a smaller thread than originally. These cylinders must be fitted with the new SF-219824 hoses. This makes it possible to adapt the front brake cylinders to the original rigid piping on the chassis. A clean and quality assembly. If you are repairing your original brake cylinders and want to replace a new original hose, order 219824.
