Accessories
Hood & stick
Gearbox & transfer case
Body
Chassis
Fuel line & air
Steering
Exhaust
Electrics
Clutch
Brakes
Wheels & tyres
Engine
Axles & propshafts
Radiator
Seats & seat belts
Suspension
Kits
Remorquage
Wiper system
Batteries
Diff lockers, shafts, driving members
Air compressors
Lighting
Roof racks
Hi-lift
Exterior styling
Side & rear steps
Bumpers
Wheel arches
Spare wheel carriers
Protections exterior
Safety
Snorkels
Alu chequer plates
Winching
Steering wheel
Travel
Others
Oil, fluids & grease
Tools
Paint & protection
Gift ideas
Books
Clothing
Nuts, bolts, screws & mountings- Out-of-Stock
Hose brake front SPECIAL
Ref : SF219824
Series Forever
Hose brake front SPECIAL
Comes with banjo screw and two copper washers. This specially modified hose is ONLY suitable if you mount it with the 243296 or 243297 brake cylinders. Explanation: It is impossible to find good quality brake cylinders for the Minerva and Serie I. We therefore sell cylinders 243296 and 243297 which have a smaller thread than originally. These cylinders must be fitted with the new SF-219824 hoses. This makes it possible to adapt the front brake cylinders to the original rigid piping on the chassis. A clean and quality assembly. If you are repairing your original brake cylinders and want to replace a new original hose, order 219824.
-
Weight : 0.15 kg
-
Position : Front right, Front, Front left
-
Packaging : Piece
Recommended by Seriesforever
1
/ 5
-
Comes with banjo screw and two copper washers. This specially modified hose is ONLY suitable if you mount it with the 243296 or 243297 brake cylinders. Explanation: It is impossible to find good quality brake cylinders for the Minerva and Serie I. We therefore sell cylinders 243296 and 243297 which have a smaller thread than originally. These cylinders must be fitted with the new SF-219824 hoses. This makes it possible to adapt the front brake cylinders to the original rigid piping on the chassis. A clean and quality assembly. If you are repairing your original brake cylinders and want to replace a new original hose, order 219824.
-
Comes with banjo screw and two copper washers. This specially modified hose is ONLY suitable if you mount it with the 243296 or 243297 brake cylinders. Explanation: It is impossible to find good quality brake cylinders for the Minerva and Serie I. We therefore sell cylinders 243296 and 243297 which have a smaller thread than originally. These cylinders must be fitted with the new SF-219824 hoses. This makes it possible to adapt the front brake cylinders to the original rigid piping on the chassis. A clean and quality assembly. If you are repairing your original brake cylinders and want to replace a new original hose, order 219824.
-
Comes with banjo screw and two copper washers. This specially modified hose is ONLY suitable if you mount it with the 243296 or 243297 brake cylinders. Explanation: It is impossible to find good quality brake cylinders for the Minerva and Serie I. We therefore sell cylinders 243296 and 243297 which have a smaller thread than originally. These cylinders must be fitted with the new SF-219824 hoses. This makes it possible to adapt the front brake cylinders to the original rigid piping on the chassis. A clean and quality assembly. If you are repairing your original brake cylinders and want to replace a new original hose, order 219824.
-
Comes with banjo screw and two copper washers. This specially modified hose is ONLY suitable if you mount it with the 243296 or 243297 brake cylinders. Explanation: It is impossible to find good quality brake cylinders for the Minerva and Serie I. We therefore sell cylinders 243296 and 243297 which have a smaller thread than originally. These cylinders must be fitted with the new SF-219824 hoses. This makes it possible to adapt the front brake cylinders to the original rigid piping on the chassis. A clean and quality assembly. If you are repairing your original brake cylinders and want to replace a new original hose, order 219824.
-
Comes with banjo screw and two copper washers. This specially modified hose is ONLY suitable if you mount it with the 243296 or 243297 brake cylinders. Explanation: It is impossible to find good quality brake cylinders for the Minerva and Serie I. We therefore sell cylinders 243296 and 243297 which have a smaller thread than originally. These cylinders must be fitted with the new SF-219824 hoses. This makes it possible to adapt the front brake cylinders to the original rigid piping on the chassis. A clean and quality assembly. If you are repairing your original brake cylinders and want to replace a new original hose, order 219824.
