Accessories
Hood & stick
Gearbox & transfer case
Body
Chassis
Fuel line & air
Steering
Exhaust
Electrics
Clutch
Brakes
Wheels & tyres
Engine
Axles & propshafts
Radiator
Seats & seat belts
Suspension
Kits
Remorquage
Wiper system
Batteries
Diff lockers, shafts, driving members
Air compressors
Lighting
Roof racks
Hi-lift
Exterior styling
Side & rear steps
Bumpers
Wheel arches
Spare wheel carriers
Protections exterior
Safety
Snorkels
Alu chequer plates
Winching
Steering wheel
Travel
Others
Oil, fluids & grease
Tools
Paint & protection
Gift ideas
Books
Clothing
Nuts, bolts, screws & mountingsDisc front brake conversion kit - 16mm studs
Ref : Z1301
Zeus Engineering
Disc front brake conversion kit - 16mm studs
Disc brake conversion kit, fits on Serie 2A and Serie 3 88" & 109".
Metric threaded studs 16mm.
The 2 brake pipes supplied are 3/8 UNF. If your Series is metric (from June 1980 onwards), please let us know and we will modify the pipes in the kit.
Purposed designed, the Zeus Disc Brake Kit is a simple and effective conversion kit that contains all the parts required to convert any series Land-Rover Axle from drum brakes to disc brakes. Fitting is straight forward (some knowledge of braking and vehicle jacking is required) and uses the familiar Land-Rover technique required to change a wheel bearing. It is a non-invasive technique that doesn't require drilling, grinding or similar modifications to the swivel ball housing.
PLEASE NOTE: The vehicle needs to be running on 16inch 6j profile wheels or larger. These have the extra space to accommodate the calliper and most importantly an enlarged "footprint" through which the increased braking power can be applied.
-
Weight : 39.00 kg
-
Remark : Special order
-
Position : Front
-
Email alert : active
-
Packaging : Set
